The HI83305 benchtop photometer measures 18 different key water quality parameters using 30 different methods. This photometer features an innovative optical system that uses LEDs, narrow band interference filters, focusing lens and both a silicon photodetector for absorbance measurement and a reference detector to maintain a consistent light source ensures accurate and repeatable photometric readings every time.
Specially designed for use with boilers and cooling towers, the HI83305 is a comprehensive way to maintain precise water conditions in systems. Problems such as corrosion, deposition, and microbial growth can occur if these key parameters, such as oxygen scavengers and silica, aren’t maintained. Oxygen scavengers are added to remove residual dissolved oxygen in boiler feed water that can cause corrosion in a steam generating plant. It is important that levels of oxygen scavengers be routinely checked to prevent against corrosion and ensure that equipment is working efficiently. Boiler water maintenance is necessary to prevent or control deposit formation as seen with silica. Silica contamination can reduce system efficiency and increase maintenance of equipment due to scaling.
A digital pH electrode input allows the user to measure pH by a traditional glass electrode. The digital pH electrode has a built-in microchip within the probe that stores all of the calibration information. Having the calibration information stored in the probe allows for hot swapping of pH electrodes without having to recalibrate. All pH measurements are automatically compensated for temperature variations with a built-in thermistor located in the tip of the sensing bulb for fast and accurate temperature measurement.
The HI83305 offers an absorbance measuring mode that allows for CAL Check standards to be used to validate the performance of the system. The absorbance mode allows the user to select one of the five wavelengths of light (420 nm, 466 nm, 525 nm, 575 nm, and 610 nm) to measure and plot their own concentration versus absorbance mode. This is useful for users with their own chemical method and for educators to teach the concept of absorbance by using the Beer-Lambert Law.
Two USB ports are provided for transferring data to a flash drive or computer and to use as a power source for the meter. For added convenience and portability the meter can also operate on an internal 3.7 VDC Lithium-polymer rechargeable battery.
Backlit 128 x 64 Pixel Graphic LCD Display
- Backlit graphic display allows for easy viewing in low light conditions
- The 128 x 64 Pixel LCD allows for a simplified user interface with virtual keys and on-screen help to guide the user through use of the meter
Built-in Reaction Timer for Photometric Measurements
- The measurement is taken after the countdown timer expires.
- Countdown timer ensures that all readings are taken at the appropriate reaction intervals regardless of user for better consistency in measurements
- Hanna's exclusive CAL Check cuvettes for validation of light source and detector
- Allows for the user to plot concentration versus absorbance for a specific wavelength for use with user-supplied chemistry or for teaching principles of photometry
Units of Measure
- Appropriate unit of measure along with chemical form is displayed along with reading
- Automatically convert readings to other chemical forms with the touch of a button
- Aids in preventing stray light from affecting measurements
Digital pH Electrode Input
- Measure pH and temperature with a single probe
- Good Laboratory Practice (GLP) to track calibration information including date, time, buffers used, offset and slope for traceability
- pH CAL Check alerts user to potential problems during the calibration process
- Space saving having a pH meter and photometer built into one meter
- Up to 1000 photometric and pH readings can be stored by simply pressing the dedicated LOG button. Logged readings are just as easily recalled by pressing the RCL button
- Sample ID and User ID information can be added to a logged reading using alphanumeric keypad
- Logged readings can be quickly and easily transferred to a flash drive using the USB-A host port or to a computer using the micro USB-B port
- Data is exported as a .CSV file for use with common spreadsheet programs
Battery Status Indicator
- Indicates the amount of battery life left
- Photometric error messages include no cap, high zero, and standard too low
- pH calibration messages include clean electrode, check buffer and check probe
Users can easily select any one of the 30 measurement methods via the dedicated METHOD button.
Up to 1000 measurement readings can be logged with user and sample ID and recalled for future use.
pH Measurement Mode
Selecting the pH measurement mode allows for the photometer to be used as a professional pH meter with many features including temperature compensated measurements, automatic two point calibration, and GLP.
Advanced Optical System
HI83305 is designed with an innovative optical system that incorporates a beam splitter so that light can be used for absorbance readings and for a reference detector. The reference detector monitors the intensity of light and modulates when there is drift due to power fluctuation or the heating of the optical components. Each part has an important role in providing unparalleled performance from a photometer.
High Efficiency LED Light Source
A LED light source offers superior performance as compared to a tungsten lamp. LEDs have a much higher luminous efficiency, providing more light while using less power. They also produce very little heat, which could otherwise affect the optical components a electronic stability. LEDs are available in a wide array of wavelengths, whereas tungsten lamps are supposed to be white light (all wavelengths of visible light) but actually have a poor blue/violet light output.
High-Quality Narrow Band Interference Filters
The narrow band interference filter not only ensure greater wavelength accuracy (+/- 1 nm) but are extremely efficient. The filters used allow up to 95% of the light from the LED to be transmitted as compared to other filters that are only 75% efficient. The higher efficiency allows for a brighter, stronger light source. The end result is higher measurement stability and less wavelength error.
Reference Detector for a Stable Light Source
A beam splitter is used as part of the internal reference system of the HI83305 photometer. The reference detector compensates for any drift due to power fluctuations or ambient temperature changes. Now you can rely on a stable source of light between your blank (zero) measurement and sample measurement.
Large Cuvette Size
The sample cell of the HI83305 fits a round, glass cuvette with a 25 mm path length. Along with the advanced optical components, the larger size of the cuvette greatly reduces errors in rotation from the indexing mark of the cuvettes. The relatively long path length of the sample cuvette allows the light to pass through more of the sample solution, ensuring accurate measurements even in low absorbance samples.
Focusing Lens for Greater Light Yield
Adding a focusing lens to the optical path allows for the collection of all of the light that exits the cuvette and focusing the light on the silicon photo detector. This novel approach to photometric measurements cancels the errors from imperfections and scratches present in the glass cuvette eliminating the need to index the cuvette.
pH Range Photometer: 6.5 to 8.5 pH
pH electrode: -2.00 to 16.00 pH
pH Resolution Photometer: 0.1 pH
pH electrode: 0.01 pH
pH Accuracy Photometer: ±0.1 pH
pH electrode: ±0.01 pH
pH Calibration Automatic one or two point calibration with one set of standard buffers available (4.01, 6.86, 7.01, 9.18, 10.01) pH Temperature Compensation Automatic (-5.0 to 100.0 oC; 23.0 to 212.0 oF); limits reduced based on the pH electrode used pH CAL Check (electrode diagnostics) clean electrode and check buffer/check probe displayed during calibration pH Method Photometer: phenol red pH-mV Range ±1000 mV pH-mV Resolution 0.1 mV pH-mV Accuracy ±0.2 mV Oxygen, Dissolved Range 0.0 to 10.0 mg/L (as O2) Oxygen, Dissolved Resolution 0.1 mg/L Oxygen, Dissolved Accuracy ±0.4 mg/L ±3% of reading Oxygen, Dissolved Method Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Azide modified Winkler method Absorbance Range 0.000 to 4.000 Abs Absorbance Resolution 0.001 Abs Absorbance Accuracy +/-0.003Abs @ 1.000 Abs Aluminum Range 0.00 to 1.00 mg/L (as Al3+) Aluminum Resolution 0.01 mg/L Aluminum Accuracy ±0.04 mg/L ±4% of reading Aluminum Method Adaptation of the aluminon method Ammonia Range Low Range: 0.00 to 3.00 mg/L
Medium Range: 0.00 to 10.00 mg/L
High Range: 0.0 to 100.0 mg/L (all as NH3-N)
Ammonia Resolution 0.01 mg/L; 0.1 mg/L Ammonia Accuracy Low Range: ±0.04 mg/L ±4% of reading
Medium Range: ±0.05 mg/L ±5% of reading
High range: ±0.5 mg/L ±5% of reading
Ammonia Method Adaptation of the ASTM Manual of Water and Environmental Technology, D1426-92, Nessler method Bromine Range 0.00 to 8.00 mg/L (as Br2) Bromine Resolution 0.01 mg/L Bromine Accuracy ±0.08 mg/L ±3% of reading Bromine Method Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, DPD method. Chlorine Dioxide Range 0.00 to 2.00 mg/L (as ClO2) Chlorine Dioxide Resolution 0.01 mg/L Chlorine Dioxide Accuracy ±0.10 mg/L ±5% of reading Chlorine Dioxide Method Adaptation of the Chlorophenol Red method. Free Chlorine Range 0.00 to 5.00 mg/L (as Cl2) Free Chlorine Resolution 0.01 mg/L Free Chlorine Accuracy ±0.03 mg/L ±3% of reading Total Chlorine Range 0.00 to 5.00 mg/L (as Cl2) Total Chlorine Resolution 0.01 mg/L Total Chlorine Accuracy ±0.03 mg/L ±3% of reading Chlorine Method Adaptation of the EPA 330.5 DPD method Chromium, Hexavalent Range Low Range: 0 to 300 μg/L (as Cr6+)
High Range: 0 to 1000 μg/L (as Cr6+)
Chromium, Hexavalent Resolution 1 μg/L Chromium, Hexavalent Accuracy Low Range: ±1 μg/L ±4% of reading
High Range: ±5 μg/L ±4% of reading
Chromium, Hexavalent Method Adaptation of the ASTM Manual of Water and Environmental Technology, D1687-92, Diphenylcarbohydrazide method. Copper Range Low Range: 0.000 to 1.500 mg/L (as Cu2+)
High range: 0.00 to 5.00 mg/L (as Cu2+)
Copper Resolution 0.001 mg/L; 0.01 mg/L Copper Accuracy Low Range: ±0.01 mg/L ±5% of reading
High Range ±0.02 mg/L ±4% of reading
Copper Method Adaptation of the EPA bicinchoninate method Hydrazine Range 0 to 400 μg/L (as N2H4) Hydrazine Resolution 1 μg/L Hydrazine Accuracy ±4% of full scale reading Hydrazine Method Adaptation of the ASTM Manual of Water and Environmental Technology, method D1385-88, p-Dimethylaminobenzaldehyde method Iron Range Low Range: 0.000 to 1.600 mg/L (as Fe)
High Range: 0.00 to 5.00 mg/L (as Fe)
Iron Resolution 0.001 mg/L; 0.01 mg/L Iron Accuracy Low Range: ±0.01 mg/L ±8% of reading
High Range: ±0.04 mg/L ±2% of reading
Iron Method Low Range: Adaptation of the TPTZ Method
High Range: Adaptation of Standard Methods for the Examination of Water and Wastewater, 3500-Fe B., Phenanthroline Method
Molybdenum Range 0.0 to 40.0 mg/L (as Mo6+) Molybdenum Resolution 0.1 mg/L Molybdenum Accuracy ±0.3 mg/L ±5% of reading Molybdenum Method Adaptation of the mercaptoacetic acid method Nitrate Range 0.0 to 30.0 mg/L (as NO3-- N) Nitrate Resolution 0.1 mg/L Nitrate Accuracy ±0.5 mg/L ±10% of reading Nitrate Method Adaptation of the cadmium reduction method Nitrite Range Freshwater
Low Range: 0 to 600 μg/L (as NO2--N)
High Range: 0 to 150 mg/L (as NO2-)
Nitrite Resolution Freshwater: 1 μg/L; 1 mg/L Nitrite Accuracy Freshwater
Low Range: ±20 μg/L ±4% of reading
High Range: ±4 mg/L ±4% of reading
Nitrite Method Low Range: Adaptation of the EPA Diazotization method 354.1
High Range: Adaptation of the Ferrous Sulfate method
Oxygen, Scavenger Range 0 to 1000 μg/L (as DEHA)
0.00 to 1.50 mg/L (as Carbohydrazide)
0.00 to 2.50 mg/L (as Hydroquinone)
0.00 to 4.50 mg/L (as ISO-ascorbic acid)
Oxygen, Scavenger Resolution 1 μg/L (DEHA); 0.01 mg/L Oxygen, Scavenger Accuracy ±5 μg/L ±5% of reading Oxygen, Scavenger Method Adaptation of the iron reduction method Phosphate Range Freshwater
Low Range: 0.00 to 2.50 mg/L (as PO43-)
High range: 0.0 to 30.0 mg/L(as PO43-)
Phosphate Resolution Freshwater: 0.01 mg/L; 0.1 mg/L Phosphate Accuracy Freshwater
Low Range: ±0.04 mg/L ±4% of reading
High Range: ±1 mg/L ±4% of reading
Phosphate Method Freshwater Low Range: Adaptation of the Ascorbic Acid method
Freshwater High Range: Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Amino Acid method
Silica Range Low Range: 0.00 to 2.00 mg/L (as SiO2)
High Range: 0 to 200 mg/L (as SiO2)
Silica Resolution 0.01 mg/L; 1 mg/L Silica Accuracy Low Range: ±0.03 mg/L ±3% of reading
High Range: ±1 mg/L ±5% of reading
Silica Method Low Range: Adaptation of the ASTM Manual of Water and Environmental Technology, D859, Heteropoly Molybdenum Blue method
High Range: Adaptation of the USEPA Method 370.1 and Standard Method 4500-SiO2
Zinc Range 0.00 to 3.00 mg/L (as Zn) Zinc Resolution 0.01 mg/L Zinc Accuracy ±0.03 mg/L ±3% of reading Zinc Method Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Zincon method Input Channels 1 pH electrode input and 5 photometer wavelengths pH Electrode digital pH electrode (not included) Photometer/Colorimeter Light Source 5 LEDs with 420 nm, 466 nm, 525 nm, 575 nm, and 610 nm narrow band interference filters Photometer/Colorimeter Light Detector silicon photodetector Bandpass Filter Bandwidth 8 nm Bandpass Filter Wavelength Accuracy ±1 nm Cuvette Type round, 24.6 mm Number of Methods 128 max. GLP calibration data for connected pH electrode Display 128 x 64 pixel LCD with backlight Logging Type log on demand with user name and sample ID optional input Logging Memory 1000 readings Connectivity USB-A host for flash drive; micro-USB-B for power and computer connectivity Power Supply 5 VDC USB 2.0 power adapter with USB-A to micro-USB-B cable (included) Battery Type/Life 3.7 VDC Li-polymer rechargeable battery / >500 photometric measurements or 50 hours of continuous pH measurement Environment 0 to 50.0 oC (32 to 122.0 oF); 0 to 95% RH, non-condensing Weight 1.0 kg (2.2 lbs.) Dimensions 206 x 177 x 97 mm (8.1 x 7.0 x 3.8") Ordering Information HI83305 is supplied with sample cuvettes and caps (4 ea.), cloth for wiping cuvettes, USB to micro USB cable connector, power adapter and instruction manual.