Hanna Instruments offers a wide variety of pH electrodes that are designed for many different applications. The type of glass used for sensing pH, bulb shape, body material, type of junction, type of reference and electrolyte used are just some of the design considerations.
The FC201D uses low temperature (LT) glass, conical bulb, food grade PVDF body, and open junction with viscolene gel electrolyte.
Low Temperature Glass Formulation
The glass tip uses a special LT glass formulation with a lower resistance of approximately 50 megaohms compared to general purpose (GP) with a resistance of about 100 megaohms. This is beneficial since many food products are stored at low temperatures. As the temperature of the glass decreases in the sample, the resistance of the LT glass will increase approaching that of GP glass at ambient temperatures. If using GP glass, the resistance would increase above the optimum resistance for the high impedance input of a pH meter.The FC201D is suitable to use with samples that measure from 0 to 50°C.
Conical Glass Tip
The conical shaped tip design allows for penetration into solids, semi solids, and emulsions for the direct measurement of pH in food products including meat, cheese, yogurt, and milk.
Polyvinylidene fluoride (PVDF) is a food grade plastic that is resistant to most chemicals and solvents, including sodium hypochlorite. It has high abrasion resistance, mechanical strength and resistance to ultraviolet and nuclear radiation. PVDF is also resistant to fungal growth.
Open Junction Reference
Suspended solids and proteins found in food products will clog a conventional ceramic reference junction. This clogging will impede the measurement circuit between the indicating electrode and the internal reference resulting in slower response time, erratic readings, and frequent electrode replacement. The open junction design consists of a solid gel interface (viscolene) between the sample and internal Ag/AgCl reference. This interface not only prevents silver from entering the sample, but also makes it impermeable to clogging, resulting in a fast response and stable readings.
The FC201D Smart pH electrode has a DIN connector.
Smart Electrode with Built-In Microchip
The built-in microchip stores calibration information including date, time, offset, and slope. This information is automatically transferred to a compatible meter when the electrode is connected. The ability to transfer information allows for swapping of probes without having to recalibrate.
Measurement Range pH: 0 to 12 Reference Cell Type single, Ag/AgCl Junction Type/Flow Rate open Type of Electrolyte viscolene Body Material PVDF Tip / Shape conic (6 x 10 mm) Matching Pin no Max. Pressure 0.1 bar Temperature Operating Range 0 to 50°C (32 to 122°F) Body Length/Overall Length 75 mm / 130 mm Temperature Sensor yes Outer Diameter 6 mm Cable 7-pole; 1 m (3.3') Connector Type DIN Amplifier yes Recommended Use dairy, milk, semi-solid foods, yogurt